0
  • No products in the cart.
Total:£0.00

Zone Valve

Benefits to installers

Conveniently swap out valve with the faster flushing tube kit prior to flushing

 

Minimum system disruption when valve needs replacing or for future system flushing

Technical Specification

 

Zone Valve

Supply voltage 220V-240V AC 50Hz
Power consumption 6W
Operating temperature range +5 to +88 degrees C
Cable length one metre
Max. differential pressure 1 Bar
Max. Static pressure 10.0 Bar
Max. Fluid temperature 100 degrees C
Max. ambient temperature 52 degrees C

 

Ball Valve
Max. temperature 110 degrees C
Max. pressure PN25
Brass nickel plated body

Part No: CCZV22KIT – £74.00

1. Brass Nickel Plated Ball Valves
2. 22mm Motorised 2 Port Zone Valve
3. Insert Adaptor
4. Fibre Washer
5. Stub Adaptor
6. Nut Supplied with Valve

Disclaimer

Any changes, modifications to the brass parts or incorrect O rings / fibre washers used other than those supplied in the kits or as supplied within the service kits, will invalidate any claims being made. We take no responsibility or liability for any damages or failure arising out of, or in connection with misuse of the product.

 

Both isolation valves must be connected to the brass stub adaptors provided in kit to prevent claims being made for loss of system water / water treatment in the unlikely event of zone valve failure.

 

IMPORTANT: ALWAYS REMOVE THE POWER HEAD FROM THE VALVE BODY WHEN TIGHTENING ONTO PIPEWORK FOR MAXIMUM TORQUE USING A T15 TORX HEAD.

2 x 22mm Isolation Valves

1 x 22mm Zone Valve

1 x 22mm Clever Coupler Kit